 |
TP-GROUP - Your Partner in Power Supplies & OEM Production |
|
Power Supplies, DIN RAIL modules, Custom design Power Supplies, Automotive, Battery Charger, Xenon Lamp Power Supply, LED Driver, OEM Production |
 |
 |
 |
 |
 |
 |
 |
120W Dual Output Open Frame Power Supplies - - - Series 120F |
|
-
Voltage: 90-264 Vac, universal input
-
Frequency: 47-63 Hz
-
Current: 1.6 A rms. Max @115 Vac and 122W load
-
Current: 0.8 A rms. Max @230 Vac and 122W load
-
Inrush surge current:40A typical, cold start@25 °C, 115Vac
-
Inrush surge current:70A typical, cold start@25 °C, 230Vac
-
Output Power: 80Watt max ( convection rating ), 122W max.
( with 15cfm forced air convection )
-
Short circuit protection: continuous hiccup mode
-
Overshoot / Undershoot: 5% max. @ Turn-on / Turn-off
|
|
Dimensions: 3"x5"x1.58" (WxLxH)
Note:
- Peak current lasting < 30sec. with max. 10% dutycycle
- Cross/Load regulation is tested at 10% to 100% of rated load and other output is set to 50% of rated load.
- Peak-to-peak for 80W (convection rating) @90Vac min. ; 122W (With 15CFM forced air) @ 100Vac min. Measurements are performed with 20mHz bandwidth and terminated with a 10uF electrolytic cap. In parallel with a 0.1uF ceramic cap.
-
Operating temperature:0°C to 40°C ambient
-
Storage temperature:-40°C to 85°C
-
Humidity:Operating, non-condensing, 5% to 95%
-
Vibration:Random operating 2.4 grms/max. 3 axes 50~500hz 10 minutes/axis
-
Shock:Operating half sine 20 gpk/max. 3 axes 10ms 6 shocks total
-
Efficiency > 78% @115Vac with full load; >80% @ 230Vac with full load.
-
Turn-on time: <2sec with full load @ 115Vac
-
Hold-up time: >10ms at full load @ 115Vac and convection rating.
-
Mtbf demonstrated: > 25,000 hours at full load and 25 °C ambient conditional, MIL-HDBK-217F
-
EMI conducted/radiated: fcc part 15 & cispr 22 & EN55022 class b
-
Designed to meet EN61000-3-2, -3-3, -4-2, -4,-4, -4-5, -4-6, -4-11
|
|
|
|
